The MAGLITE ML100-S2DX6 2C LED Flashlight, in black color, is designed and manufactured with the highest standards and top quality materials, to offer you high-end performance and reliability. With advanced features, it offers you the best results under many demanding conditions, such as the 5 MODES for 4 FUNCTION SETS and also 2 OUTPUT LEVELS, one for maximum brightness, the other to conserve power (High/Low) and also an emergency strobe mode. The next generation of MAG-LED technology is also there, for a whole new level of brightness and a high intensity light beam. In a sleek design, the MAGLITE ML100-S2DX6 2C LED Flashlight, includes a Pushbutton switch for MULTI-MODE, with QuickClik function and is built from high strength aluminum alloy tough enough to last a lifetime of use. So whether you are into outdoor activities such as, camping, hiking or are a professional, aircraft mechanic, security, technician or just need a portable light with a high powered light beam, the MAGLITE ML100-S2DX6 2C LED Flashlight is the tool for the job, to provide a focusable beam plus three basic functions.
MULTI-MODE:
1. MAXIMUM brightness power, up to 13 hours
2. (LOW) 25% brightness power for reading at night or for a prolonged emergency, up to 48 hours
3. EMERGENCY STROBE
4. SOS signal
5. Momentary On/Off.
(All modes turn OFF with a SINGLE CLICK).
Function Sets:
- Function Set 1: 1 CLICK Full Power, 2 CLICKS Power Save, 3 CLICKS Strobe
- Function Set 2: 1 CLICK Full Power, 2 CLICKS Power Save, 3 CLICKS SOS Signal
- Function Set 3: 1 CLICK Momentary, 2 CLICKS Full Power, 3 CLICKS Power Save
- Function Set 4: 1 CLICK Momentary, 2 CLICKS Full Power, 3 CLICKS Strobe
Standard setting is Function Set 1. If you want to choose a different function set, follow these steps:
1. Unscrew the tail cap (you may not have to remove it all the way, you only need to back it out of the barrel enough that the flashlight will not turn on).
2. Pause for 2 seconds.
3. Press the switch button and keep holding it down.
4. While still holding down the switch button, screw the tail cap back in until it is tight.
5. Keep holding down the switch button. Within about 4 seconds the flashlight will start to blink.
6. The number of blinks indicates the new selected Function Set.
7. To choose a new Function Set, release the switch button after the corresponding number of blinks
(releasing after 1 blink chooses Function Set 1, releasing after 2 blinks chooses Function Set 2, release after 3 blinks for Function Set 3, and release
after 4 blinks to choose Function Set 4. Your choice of a Function Set remains in effect until you change it by repeating the above process)
Technical features:
- Pushbutton switch for MULTI-MODE, with QuickClik function
- Water Resistant: Yes, IPx4
- Drop Resistance: 1 meter
- Light Source: LED, with Next-generation MAG-LED technology for a whole new level of brightness
- Lumens: 137
- Beam distance: 307 meters
- Peak Beam Intensity: 23571 cd
- Run Time High: 13 hours
- Run Time Low (25% power): 48 h?urs
- Power Management: Yes, dynamic
- Battery type: 2 ? C Alkaline (included)
- Rechargeable flashlight: No
- Head Diameter: 50.22 mm
- Barrel Diameter: 30.46 mm
- Length: 232.03 mm
- Package: Blister
- Color: Black
- Warranty: TEN (10) YEAR LIMITED WARRANTY*
Package includes:
- MAGLITE ML100-S2DX6 2C LED flashlight, in black color
- 2 ? C Alkaline batteries.
*= This warranty does not cover any of the following: 1. Battery exhaustion, 2. Battery leakage, 3. LED burnout and/or LED module failure, 4. Damage to or failure of the flashlight or any component thereof due to alteration, misuse, battery leakage or lack of maintenance.
