TELEVES 531911 SmartKom Indoor is intended as a home amplifier with digital channel filtering for systems with a small number of outlets. This unit has 3 VHF+UHF inputs that allow for up to 32 filters in total and also FM and SATELLITE mixing inputs. Additionally, it has automatic/programmable powering, 5G LTE filtering and short-circuit protection. Each of the 32 filters has high selectivity which allows the balancing of adjacent channels. It has individual AGC and it can be programmed to filter any VHF channel (5 to 12) and UHF channel (21 to 48). Channels are automatically balanced according to the output level. It can be self-programmed by a long press (5+ sec.) of the “READJUST” button. This function allows channel scanning through the connected inputs. After that, levels need to be re-adjusted. When the scanning process is started, powering through input is enabled. The green LED will flash slowly to indicate that DVB-T/T2 channels are being scanned through the connected inputs and that the unit is being configured according to the channels that have been already found. Once the scanning is complete, the LED will flash faster to confirm the unit adjustment. A steady light indicates that the process is completed. Channels already programmed/found can be also adjusted by the unit. If such was the case, a short press of the button (<3 sec). In order to program the amplifier, by using the ASuite app, you can configure the following parameters: channels, output level, manual level adjustment and enabling/disabling power supply to inputs. The amplifier can be powered in two different ways:
1. Remote powering: The amplifier is powered through the coaxial distribution (output connector), using a 12V power supply unit EDISION 08-07-0001 inserted in the cascade NEVOSWITCH installation. It is also possible to power the device from cascade NEVOSWITCH multiswitches powered in the distribution.
2. Local powering: A power supply unit must be connected to the amplifier (recomended ref.732101). If so, remote powering through the amplifier output will be interrupted.
SmartKom intelligent amplifier Autoprogramming, or manual programming via Bluetooth (ASuite) Filters, mixes, amplifies and balances at the touch of a button The autoprogramming function of the amplifier gives this device the ability of programming and adjusting by itself simply by pressing a button. In addition, thanks to the built-in Bluetooth antenna, manual programming of the amplifier can be done wirelessly using a smartphone or tablet, with the ASuite application. The unit is R.E.D. compliant.

Highlights:
- "All-in-one" device: it combines the functions of several elements of an installation such as filters, mixers and amplifiers, supplying a complete signal conditioning, for distribution under a single coaxial cable
- Wireless manual programming (via Bluetooth) through a smartphone or tablet with the ASuite app.
- Plug&Play: the amplifier automatically programs and adjusts the channel level by pressing the autoprogramming button for 5 seconds. In addition, SmartKom automatically powers the antenna in case the signal requires it (as example for TELEVES TFORCE B.O.S.S. antennas)
- Digital processing of the channels: a perfect balance of signal level between different channels is obtained at the output
- Automatic gain regulation of signal in each filter (AGC)
- Great signal quality: the installation of this device immediately after a Televes intelligent antenna prevents signal degradation and results in the best quality
- High selectivity digital filters (28dB@1MHz)
- SAW filter (Surface Acoustic Wave) included for high rejection of 4G/5G telephone interferences
- Remote powering through the output coaxial connector connected to a domestic power supply inserted in the installation or through the trunk lines in a distribution installation with dCSS MSW already powered, or local powering through an external power supply by Jack connection
- Wireless manual programming (via Bluetooth) through a smartphone or tablet with the ASuite app
- Secure configuration: in case of electrical failure SmartKom saves the current configuration, avoiding configuring it again
- High output level
- F connection system
- LEDs indicators displaying both adjustment and programming status on the amplifier and on the power supply
- High shielding chassis, made of Zamak
- 100% European design and manufacturing: fully automated manufacturing, subject to the most stringent quality controls

Technical features:
- Inputs/Bands: 3x VHF+UHF, 1x FM, 1 x SAT
- Frequency range MHz: 174 ... 230 / 470 ... 694, 87.5 ... 108 , 950 ... 2150
- Input dynamic range: dBµV 40 ... 80 VHF+UHF only
- Maximum gain: dB 45 VHF+UHF only. FM -1 , SAT -2
- Gain regulation: dB Automatic Gain Control in VHF+UHF only
- Number of filters: 32 VHF+UHF channels
- Channels per filter: 1 VHF+UHF channels
- Channel/filter programming: 5-12 (VHF) 21-48 (UHF)
- Filtered channel level regulation: AGC per filter VHF+UHF
- Selectivity: dB 28/12 @1MHz* VHF+UHF , >20 @20MHz FM
- Output level: dBµV 82 (VHF) 85 (UHF)
- Vout regulation: dBµV 57 ... 82 (VHF) , 60 ... 85 (UHF)
- Manual regulation: dB ±3 VHF+UHF only
- Noise figure: dB 7 (VHF) 6 (UHF)
- Powering inputs: Vdc 12 (AUTO/ON/OFF) VHF+UHF . SAT: Vdc 12
- Max. consumption at inputs mA: 70 per input VHF+UHF . SAT: 500
- Max. consumption: mA 500 (@12V w/o DC IN)
- Protection index IP 23
- Operating temperature ?C: -5 ... +45
*With adjacent channels: 28dB // Without adjacent channels: 12 dB